Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ademco Galaxy 16 beeping after unset
17-01-2013, 09:43 PM,
#1
Ademco Galaxy 16 beeping after unset
Hi

I unset the alarm (it was set this morning using another user code) on returning home (using the manager code). Went upstairs and the alarm box (inside the house not the outside one) beeped twice. There is a PIR on the landing which I would have triggered. I checked the log and there was nothing after I unset it. I then pressed escape to get out of the log and then went upstairs again and it beeped twice (a bit like the walk test ). I have walked in front of that PIR again and the other ones and they're not making any beeps.

I've not had this happen before and wonder if anyone has any ideas

Many thanks
Reply
17-01-2013, 10:20 PM,
#2
RE: Ademco Galaxy 16 beeping after unset
Sounds like either chime has been activated or something to do with walk-test. We have Galaxy experts on here & I'm not one. Someone will be along shortly with better advice than I can give.
Ron.
Reply
18-01-2013, 12:08 PM,
#3
RE: Ademco Galaxy 16 beeping after unset
It could be allowing for a "deviation from entry/exit route" and warning you.
Aber Alarms Fire & Security (Aberystwyth)
17 years experience with alarm/CCTV installation and service/commissioning.
Fire, Intruder, CCTV. All enquiries welcome.
Tel: 01970 636555 or Email aberalarms@tiscali.co.uk
Reply
18-01-2013, 02:02 PM,
#4
RE: Ademco Galaxy 16 beeping after unset
it sounds to me (as a Gaalxy installer) that you have it in chime mode,
use your manager code and switch it off,
then try again

Oasis
Reply
18-01-2013, 08:30 PM,
#5
RE: Ademco Galaxy 16 beeping after unset
Mine idea sounds better. Lol ;-)
Aber Alarms Fire & Security (Aberystwyth)
17 years experience with alarm/CCTV installation and service/commissioning.
Fire, Intruder, CCTV. All enquiries welcome.
Tel: 01970 636555 or Email aberalarms@tiscali.co.uk
Reply
18-01-2013, 09:02 PM,
#6
RE: Ademco Galaxy 16 beeping after unset
In my opinion mines aren't a good idea, especially in play areas.:)
Reply
19-01-2013, 07:21 PM,
#7
RE: Ademco Galaxy 16 beeping after unset
I was drunk :s

:P
Aber Alarms Fire & Security (Aberystwyth)
17 years experience with alarm/CCTV installation and service/commissioning.
Fire, Intruder, CCTV. All enquiries welcome.
Tel: 01970 636555 or Email aberalarms@tiscali.co.uk
Reply
19-01-2013, 08:39 PM,
#8
RE: Ademco Galaxy 16 beeping after unset
No need to tell me that. You might as well say you were breathing.:D
Reply
19-01-2013, 08:41 PM,
#9
RE: Ademco Galaxy 16 beeping after unset
Called out 1.00am this mornig. Fried Veritas transformer.:(
Reply
19-01-2013, 11:18 PM,
#10
RE: Ademco Galaxy 16 beeping after unset
More information needed, what condition is the battery in ?
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Galaxy 16 Plus help admin 6 885 10-11-2012, 07:43 PM
Last Post: Rem Alarms
  Adding fobs to galaxy panel via pyronix reader admin 0 244 12-05-2012, 09:33 PM
Last Post: admin
  Ademco 4250 panel admin 0 252 12-05-2012, 09:33 PM
Last Post: admin
  reset code for ademco microtech/accord xpc admin 0 595 12-05-2012, 09:32 PM
Last Post: admin
  Dying / Dead Ademco Alarm System admin 0 547 12-05-2012, 09:31 PM
Last Post: admin
  no display on Ademco Microtech galaxy 16 plus cp171 admin 0 401 12-05-2012, 09:30 PM
Last Post: admin
  Galaxy 8....ADT admin 0 274 12-05-2012, 09:29 PM
Last Post: admin
  galaxy 16, green light is flashing? admin 0 334 12-05-2012, 09:28 PM
Last Post: admin
  Ademco Microtech admin 0 363 12-05-2012, 09:27 PM
Last Post: admin
  ADT Ademco Microtech Galaxy 8 Plus CP171 admin 0 506 12-05-2012, 09:26 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)