Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MOSS Security 1000 unresponsive after power tripped
14-07-2012, 03:43 PM,
#1
MOSS Security 1000 unresponsive after power tripped
I'm in rented accommodation which has a MOSS Security 1000 unit installed. We've had fuses blow a couple of times, and this seems to reset the alarm. I have been able to reset the codes etc. in the past using the manual on here. However the last time it happened the alarm became unresponsive. It has the AC LED on, but none of the other LEDs are lit and pressing the buttons doesn't make any noise. Can anyone advise how I might be able to get it working again? Getting the landlord out is a pain so I'm hoping someone might know a simple way of getting it back up and running.

Thanks,

Dan
Reply
14-07-2012, 04:43 PM,
#2
RE: MOSS Security 1000 unresponsive after power tripped
Try removing the power again.
When was the battery last changed?
Tell me, and I'll forget. Show me, and I'll remember. Involve me, and I'll learn.
Reply
15-07-2012, 10:08 PM,
#3
RE: MOSS Security 1000 unresponsive after power tripped
Tried turning the power off and back on again at the breaker but it stays the same. Not sure when the battery was last changed as it is rented accommodation. We've been in it for around 11 months and I believe it was empty for around 6 months before that. Took the cover off but there was nothing that was obviously a battery to try removing/replacing. Any pointers as to what I should be looking for?

Thanks,

Dan


(14-07-2012, 04:43 PM)admin Wrote: Try removing the power again.
When was the battery last changed?
Reply
15-07-2012, 11:36 PM,
#4
RE: MOSS Security 1000 unresponsive after power tripped
Any chance of a photo of the panel etc. Dan ?

Engel
Reply
16-07-2012, 01:53 PM,
#5
RE: MOSS Security 1000 unresponsive after power tripped
Managed to fix by flipping circuit, leaving off for a while and disconnecting/reconnecting battery. Thanks for the help.

Dan
Reply
16-07-2012, 03:00 PM,
#6
RE: MOSS Security 1000 unresponsive after power tripped
Well done Dan,

Keep in touch and don't hesitate to post about any problem, large or small.

The instructions for this model are available for download on the forum if you don't have copies.

Best Wishes,

Engels
Reply
16-07-2012, 11:41 PM,
#7
RE: MOSS Security 1000 unresponsive after power tripped
You still need to change the battery
Tell me, and I'll forget. Show me, and I'll remember. Involve me, and I'll learn.
Reply
17-07-2012, 12:52 AM,
#8
RE: MOSS Security 1000 unresponsive after power tripped
Oh ! and you still need to change the battery ! oops, I'm getting slow in my old age, my beloved batteries. Thanks Admin.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Moss 2000 house alarm Guest 1 329 21-06-2012, 05:44 PM
Last Post: FastCar
  Moss MS2000 alarm fault admin 0 289 22-05-2012, 07:19 PM
Last Post: admin
  Moss Security MS 1000 Alarm Manual admin 4 663 28-04-2012, 05:39 PM
Last Post: admin
  Moss MS1000 Manual 0 319 Less than 1 minute ago
Last Post:
  Moss Security MS Fault Finding 0 287 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 1 Guest(s)