Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
galaxy 16, green light is flashing?
12-05-2012, 09:28 PM,
#1
galaxy 16, green light is flashing?
Hi can any one tell me the key pad green light is flashing
cannot set alarm when iprss the A or B button it says unable to set
Power Failure how do i correct this fault.


--------------------------------------------------------------------------------
RE: galaxy 16 - Rem Alarms - 02-01-2011 04:54 PM

Either the mains is off (fuse) or the battery needs replacing.
Ron.


--------------------------------------------------------------------------------
RE: galaxy 16 - goosebumps - 02-01-2011 08:14 PM

hi Ron if it is the fuse do i take cover off the big metal box ? do i have to switch off the power to the
box and what type of fuse do i need
and thanks for your quick Reply.


--------------------------------------------------------------------------------
RE: galaxy 16 - Rem Alarms - 02-01-2011 10:48 PM

Should be a fused spur near the panel (metal box), then there's another fuse in the panel on the mains terminals. There are more on the PCB. The ones inside the panel are quick-blow, glass ones rated from 500mA to 1A I think. Make sure you replace with exactly the same rated fuse if you need to replace them.
Ron.


--------------------------------------------------------------------------------
RE: galaxy 16 - goosebumps - 08-01-2011 07:43 PM

hi Ron there is no fused spur near the metal box so i loosend the screws and the internal alarm went off
i put the screws back in and reset the alarm but is asking for a engineers code i have put in 1234 and 0000
but says wrong code do you know of any that may work or maybe a local firm can fix this alarm
in sheffield/Rotherham the person who put this alarm in has moved and i do not have his phone number


--------------------------------------------------------------------------------
RE: galaxy 16 - Rem Alarms - 08-01-2011 08:38 PM

Did you check the mains input? Simple test; disconnect battery & if it dies there's no mains. Read site disclaimer first!!! I could email you the manual but it's pretty complicated to reprogram. I do know someone in your area who might fix it for you. Either way email me.
Ron.


--------------------------------------------------------------------------------
RE: galaxy 16 - goosebumps - 10-01-2011 01:55 PM

Hi Ron to diconnect the battery do i have to turn the mains off first ?
i will email you later.
many thanks.


--------------------------------------------------------------------------------
RE: galaxy 16 - Rem Alarms - 10-01-2011 02:56 PM

Please do. Please read site disclaimer first.
Ron.
Tell me, and I'll forget. Show me, and I'll remember. Involve me, and I'll learn.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ademco Galaxy 16 beeping after unset sw1 11 715 20-01-2013, 01:51 PM
Last Post: engels7570
  Galaxy 16 Plus help admin 6 885 10-11-2012, 07:43 PM
Last Post: Rem Alarms
  Adding fobs to galaxy panel via pyronix reader admin 0 244 12-05-2012, 09:33 PM
Last Post: admin
  no display on Ademco Microtech galaxy 16 plus cp171 admin 0 401 12-05-2012, 09:30 PM
Last Post: admin
  Galaxy 8....ADT admin 0 274 12-05-2012, 09:29 PM
Last Post: admin
  ADT Ademco Microtech Galaxy 8 Plus CP171 admin 0 506 12-05-2012, 09:26 PM
Last Post: admin
  Ademco microtech galaxy 16 plus admin 0 964 12-05-2012, 09:26 PM
Last Post: admin
  Ademco Microtech Galaxy 16+ admin 0 384 12-05-2012, 09:24 PM
Last Post: admin

Forum Jump:


Users browsing this thread: 1 Guest(s)